What is the difference between BAC water and sterile water?
| Hospira label | Bacteriostatic water | Sterile water |
|---|---|---|
| Preservative | Benzyl alcohol, 0.9% (9 mg/mL) in the 30 mL plastic vial, 1.1% (11 mg/mL) in the 20 mL fill glass vial1 | No bacteriostat, antimicrobial agent or added buffer2 |
| Container | Multiple-dose 30 mL plastic vial, or 20 mL fill in a 30 mL glass vial1 | Single-dose 10 mL vial2 |
| After first use | Repeated withdrawals may be made1 | Do not reuse; discard the unused portion2 |
What is in each, and can one replace the other?
Both Hospira labels say the water is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to the instructions of the drug's manufacturer.12 The bacteriostatic water label says the volume used depends on the vehicle concentration, dose and route of administration as recommended by the drug's manufacturer.1 Some drugs may be incompatible with a vehicle that contains benzyl alcohol, and the label says to consult a pharmacist, if available.1
The table is set at the top of the page
Where water is needed for neonates, the bacteriostatic water label names only preservative-free Sterile Water for Injection.1
Which diluent do labels name, and how long does a mixed vial last?
Each label below names its own diluent and its own time after mixing, and none of these times is a general rule.3456 Both Hospira water labels say not to store reconstituted drug solutions unless the drug's manufacturer directs otherwise.12
| Product | Diluent the label names | After mixing |
|---|---|---|
| Novarel (HCG)3 | Bacteriostatic water, 0.9% benzyl alcohol3 | Refrigerated, used within 30 days3 |
| Egrifta WR (tesamorelin 11.6 mg)4 | Bacteriostatic water4 | Room temperature, 20°C to 25°C; discard 7 days after mixing; do not freeze4 |
| Egrifta SV (tesamorelin 2 mg)5 | Sterile water5 | Used right away; not stored, frozen or refrigerated5 |
| Zomacton 5 mg6 | Bacteriostatic sodium chloride, 0.9% benzyl alcohol6 | Refrigerated up to 14 days6 |
| Zomacton 10 mg6 | Bacteriostatic water, 0.33% metacresol6 | Refrigerated up to 28 days6 |
The Hospira bacteriostatic saline label describes an isotonic solution with 9 mg of sodium chloride and 0.9% benzyl alcohol in each mL.7 For the 5 mg vial, the Zomacton label says that with a known hypersensitivity to benzyl alcohol, in neonates, or in pregnant or lactating women, it is mixed instead with 0.9% Sodium Chloride Injection, one dose per vial, and the unused portion discarded.6 No label or study found for this guide compares peptide stability or potency in saline against water, and no product label, regulator text or trial in the sources searched for this guide covers research peptides such as BPC-157 or retatrutide.
How long do the bottles last?
Both Hospira labels give 20°C to 25°C (68°F to 77°F) for storing the water.12
For the 30 mL multiple-dose bottle of bacteriostatic water supplied with Egrifta WR, its instructions say to throw away any water left in the bottle 28 days after first use.4 USP chapter 797, as quoted in the 2010 APIC position paper on safe injection practices, requires multi-dose vials to be given a beyond-use date 28 days after initial stopper penetration unless the package insert states otherwise.8 The same paper reports that the CDC indicates multi-dose vials can be used until the manufacturer's expiration date unless there are concerns about sterility, and calls the beyond-use date of multi-dose vials in use an unresolved issue.8
Is bacteriostatic water safe?
The bacteriostatic water label contraindicates benzyl-alcohol solutions in neonates.1 The Serostim label links gasping syndrome to benzyl alcohol dosages above 99 mg/kg/day in neonates and low-birth weight neonates.9 Both water labels say intravenous use without a solute may cause hemolysis.12
A 2022 laboratory NMR study by Li and colleagues of one acylated 31-residue peptide found that benzyl alcohol did not induce aggregation.10 In the same study, 1% (w/v) m-cresol produced insoluble aggregates holding 25% (w/w) of the peptide after 24 hours at room temperature.10 A separate 2015 laboratory study by Bis and colleagues of interferon alpha-2a, a protein, found that benzyl alcohol induced aggregation in a concentration-dependent manner.11 One study is of a peptide and the other of a protein, so the two results are not comparable.
Does the amount of water change the syringe mark?
The labels set water volume product by product: 0.5 mL for a 2 mg Egrifta SV vial and 1.3 mL for an 11.6 mg Egrifta WR vial.54 Of the people who logged BPC-157, 41% set up 10 mg with 2 mL and 15% set up 10 mg with 1 mL.14 The ISO 8537:2007 standard covers insulin syringes for 40 units of insulin per mL (U-40) and 100 units of insulin per mL (U-100), and the Humulin R label says U-100 insulin contains 100 units/mL.1213
As a worked example, 500 mcg, the BPC-157 dose logged by 49% of people logging it,14 from a 10 mg vial mixed with 2 mL (5 mg per mL) is 0.1 mL, or 10 units on a U-100 syringe.
Draw to
unitsmL
0.3 mL · 30 units syringe0.5 mL · 50 units syringe1 mL · 100 units syringe3 mL · 3cc syringe0.5 mL · 20 units, U-40 syringe1 mL · 40 units, U-40 syringe
Concentration is the powder in the vial divided by the water. The draw is the dose divided by the concentration, in mL, times 100 on a U-100 syringe or 40 on a U-40. Every figure comes from what you enter.
Save to Milligram
Open in Milligram shows once the calculator has a result.
Open in Milligram is off while the dose is more than the whole vial. Check the dose and its unit.
Open in Milligram is off while the draw is under one unit. Check the dose and its unit.
Open in Milligram adds BPC-157 and this dose to a plan in the app, with the schedule you pick here. The vial and water are not saved.
Mixed with 1 mL instead, the same BPC-157 dose is 5 units, and with 3 mL it is 15 units.
How the logged figures are counted
Milligram app dose logs, aggregated and anonymous, the 90 days to 17 November 2026. Each figure is a share of people who set up or logged the item, and each share is of at least 50 people.
References
- Hospira, Inc. (DailyMed). Bacteriostatic Water for Injection, USP (Hospira) prescribing label. 2019. dailymed.nlm.nih.gov
- Hospira, Inc. (DailyMed). Sterile Water for Injection, USP, single-dose vial (Hospira) prescribing label. 2025. dailymed.nlm.nih.gov
- Ferring Pharmaceuticals (DailyMed). Novarel (chorionic gonadotropin) for injection prescribing label. 2020. dailymed.nlm.nih.gov
- Theratechnologies (DailyMed). Egrifta WR (tesamorelin) prescribing information and instructions for use. 2025. dailymed.nlm.nih.gov
- Theratechnologies (DailyMed). Egrifta SV (tesamorelin) prescribing information and instructions for use. 2025. dailymed.nlm.nih.gov
- Ferring Pharmaceuticals (DailyMed). Zomacton (somatropin) prescribing information. 2024. dailymed.nlm.nih.gov
- Hospira, Inc. (DailyMed). Bacteriostatic 0.9% Sodium Chloride Injection, USP (Hospira) prescribing label. 2019. dailymed.nlm.nih.gov
- Association for Professionals in Infection Control and Epidemiology. APIC position paper: Safe injection, infusion, and medication vial practices in health care (Am J Infect Control 2010;38:167-72). 2010. info.ncdhhs.gov
- EMD Serono (DailyMed). Serostim (somatropin) prescribing information. 2020. dailymed.nlm.nih.gov
- Li et al., Merck & Co.; PubMed. Molecular Mechanism of Antimicrobial Excipient-Induced Aggregation in Parenteral Formulations of Peptide Therapeutics (Mol Pharm 2022), PubMed abstract. 2022. eutils.ncbi.nlm.nih.gov
- Bis et al.; PubMed. Role of benzyl alcohol in the unfolding and aggregation of interferon alpha-2a (J Pharm Sci 2015), PubMed abstract. 2015. eutils.ncbi.nlm.nih.gov
- International Organization for Standardization (preview hosted by iTeh). ISO 8537:2007 Sterile single-use syringes, with or without needle, for insulin (free preview of the standard). 2007. cdn.standards.iteh.ai
- Eli Lilly, on FDA Drugs@FDA. Humulin R U-100 (insulin human) label, FDA copy. 2015. accessdata.fda.gov
- Milligram app dose logs, aggregated and anonymous, the 90 days to 17 November 2026. Each figure is a share of people who set up or logged the item, and each share is of at least 50 people. How these figures are counted